2017 China New Design splitter Gas brick block equipment for Accra Manufacturer
2017 China New Design splitter Gas brick block equipment for Accra Manufacturer Detail:
Splitting machine by hydraulic power station and splitting gun two parts, splitting machine by ultra high pressure oil pump output to drive the huge propelling force cylinder, by mechanical amplification can be split by objects in a predetermined direction. Hydraulic station hydraulic oil supply 60Mpa to split the gun, splitting gun can produce dozens of tons of thrust, splitting machine on both sides to promote the expansion of wedge, expansion up to hundreds of tons, so that the object from the internal split and separated. Splitting machine is mainly used for building stone mining operations: the bulk ore (ore, non-metallic mineral) two disintegration; concrete (cement pavement, machine foundation, bridge and building components) and all the local demolition work, compared with the traditional mode of operation, the splitting machine has the advantages of simple structure, convenient operation, operation high efficiency, low cost, safety, energy saving, energy saving management etc.
Characteristics of splitting machine:
The splitting machine can control the hydraulic in static environment, not like blasting machines and other impact of demolition, drilling equipment, produce some danger; no need to take safety measures complex.
2 environmental protection
When working, it will not produce vibration, impact, noise, dust, flying debris, etc.. The surrounding environment will not be affected, even in the densely populated areas or indoors, as well as precision equipment, can work without interference.
Splitting machine a few seconds can complete the splitting process, and can continuously work, high efficiency, operation and maintenance costs are very low, and there is no need to take isolation or other time-consuming and costly measures like blasting operations like Anren.
Unlike most traditional demolition method and equipment, splitting machine can accurately determine the direction of pre splitting, splitting shape and the need for the section size, splitting and high precision.
Wedge shape design and durability of structure design of crack machine humanized, to ensure that the method is simple and easy to learn, only a single operation, convenient maintenance, long service life; splitting machine and hydraulic pump station is very convenient transportation
Split machine production of the following brick style
Product detail pictures:
Related Product Guide:
The Benefits of Installing Clay Brick Pavers
Basic Function of Semiautomatic Machine
we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is "You come here with difficulty and we supply you with a smile to take away" for 2017 China New Design splitter Gas brick block equipment for Accra Manufacturer, The product will supply to all over the world, such as: kazan , Thailand , Botswana , Our company always provides good quality and reasonable price for our customers. In our efforts, we already have many shops in Guangzhou and our products have won praise from customers worldwide. Our mission has always been simple: To delight our customers with best quality hair products and deliver on time. Welcome new and old customers to contact us for the future long term business relationships.
DOWNLOAD APP NOW from play store click here https://play.google.com/store/apps/details?id=electronicselectrical.com.electricalandelectronicseng
what is LED?
What is dual converter ?
What are the advantages of HVDC?
what is IGBT?
what is oscillator ?
what is linear motor?
what is heat sink ?
what is mean by harmonics ?
what is super conductor ?
what is regenerative braking ?
what is Edison effect?
what is contactor ?
what is the difference between synchronous and asynchronous motor?
what is eddy current ?
what is the difference between earthing and grounding ?
What is TRIAC?
what is DIAC?
suggest electronics project
suggest electrical projects
what are the importance of reactive power?
what will happen if DC is applied to induction motor?
what is time domain and frequency domain?
what is mean by sampling of signals ?
what is TCSC?
what is UPFC?
what is gate turn off thyristor (GTO)?
explain chopper controlled dc motor?
how can we calculate voltage with ammeter ?
what will be the maximum speed for 50 Hz frequency and 2 pole motor?
which type of oil is use in transformers ?
what is UPS and what are its uses?
what is SMPS?
how can we improve power quality ?
what are the starting methods of induction motor?
Can we start dc series motor at no load?
what is the difference between fuse and circuit breaker ?
what are the uses of BLDC motor?
what are the uses of stepper motor?
what is armature reaction ?
what is the principle of generator ?
what is the principle of motor?
what is HRC fuse?
what is variable frequency drive ?
what is flip flop ?
What is static var compensator ?
what is FACTS?
what is VLSI?
pure meta have any resistance ?
what is doped silicon ?
what is the difference between resistor and resistance ?
resistivity of wire depend on?
how can we improve power factor?
what are the disadvantages of low power factor?
what are the types of dc motor?
what are the losses in transformer and why?
which machine is use in vacuum cleaner?
what are the different methods for starting synchronous machine ?
what is back emf?
Which cable is use for power transmission ?
which is better AC or DC ?
why star delta starter is use to start induction motor?
what is reluctance motor?
what is relay?
what is mean by radio?
what is skin effect?
What is proximity effect?
what is Ferranti effect?
What is JFET?
what is MOSFET ?
what is rectifier ?
what is inverter ?
what is H-bridge?
what is semiconductor ?
what is hall effect sensor ?
what is microcontroller?
what is microprocessor ?
why the armature of DC generator is laminated ?
what is integrated circuit ?
what is conductor ?
what is linear regulator?
what is the difference between transformer and electrical machine?
what are the types of transformer ?
why capacitor allows AC and blocks DC?
which motor is use in ceiling fan?
VISIT NOW http://electronics2electrical.com
FEEL FREE TO SUBSCRIBE + LIKE + SHARE + ASK
The North Caucasus Research Institute of Construction Materials and Technologies, Stromtechnika, is a leader in the realization of the most cost-effective technologies for producing clay bricks.
The company is involved in the entire process of designing, supplying equipment and building and starting up brick – making factories, tile – making plants and other enterprises that produce construction materials. We create design estimates, perform research and analysis on raw materials, supply and assemble equipment, build kilns for firing bricks and tiles and test out and start-up the finished factories.
Stromtechnika’s staff does all the work in designing and building brickmaking factories itself, without relying on subcontractors. This reduces the time involved and the eventual project costs. It also allows us to guarantee the high quality of our work.
Each year, Stromtechnika builds four to five new brick – making factories, not to mention the dozens of existing factories that we renovate and re-equip. The company is able to handle such a large work load thanks to the high professionalism of the Institute’s staff. The majority of our employees have more than thirty years’ experience in designing and building brick – making factories.
All the technological solutions that we offer employ the most effective methods to reach the clients’ goals, thus resulting in substantial profits.
Among other solutions that we widely advertise and offer to our clients is the dry – pressing method, which uses kilns with removable panels. The profitability of this technology exceeds 200%. A brick – making factory we recently built has production costs of US$ 0.03 per brick. At the same time, bricks produced at this factory have precise geometric proportions and comply with European quality standards. This can be regarded as the best example of the quality of our work and the thoughtfulness that we put into every project.
By starting up a brick – making factory using our dry pressing method, you will put into practice one of today’s most promising and profitable business ideas, thus allowing you to generate high earnings for years to come.
Теl. / fax:
+7 ( 863) 273 – 27 – 91
+7 ( 863) 273 – 27 – 92
+7 ( 863) 273 – 27 – 93
+7 ( 863) 273 – 27 – 94
strom @ brickmaking.ru
By Ina from Ukraine - 2015.12.30 10:21
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Lilith from Dominica - 2015.09.19 18:37