Wholesale Discount Small cement brick to Hungary Factory
Wholesale Discount Small cement brick to Hungary Factory Detail:
Small cement brick, small brick, small brick factory
1 NYQT2-12 manual hydraulic brick machine, using artificial cloth and motor vibration combined, can produce a variety of concrete porous brick, standard brick, the hardness and strength of products have reached the national standard.
2 the whole machine adopts full hydraulic drive, which extends the forming process of NYQT6-15 type block machine, simple electrical design, flexible manual operation and motor vibration.
3 molding method for mode and hydraulic pressure.
4 the equipment investment is small, quick.
Each block number
5. pallet specifications (mm): 830 x 450 x 20, 1500.
Weight of the whole machine: 800kg
The exciting force is not less than 2000 KGF
Exciting frequency: 2840rPM
Installed capacity: 11.5KN
Ningbo Nuoya cement brick factory
Address: Jiang Nan Cun Gao Qiao Zhen Gao Qiao Xi Lu Zhejiang city of Ningbo Province, No. 84
Zip code: 315174
Tel: 880855821342936091 – 0574 Chen
Fax: 0574 – 88018826
Product detail pictures:
Related Product Guide:
Expansion of Business With the Finest Brick Making Machine
The Benefits of Installing Clay Brick Pavers
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Wholesale Discount Small cement brick to Hungary Factory, The product will supply to all over the world, such as: Sacramento , Angola , Auckland , Now, with the development of internet, and the trend of internationalization, we have decided to extend business to overseas market. With the propose of bringing more profits to oversea customers by providing directly abroad. So we have changed our mind, from home to abroad, hope to give our customers more profit, and looking forward to more chance to make business.
T10 Automatic Block Making Machine
—- Producing hollow block, interlock, paver, curbstones and insulation blocks, etc
Pallets size: 1,200x870x45mm (Wooden Pallets)
Pallets size: 1,200x870x12mm (Steel Pallets)
Maximum Moulding Area: 1,100×820 mm
Production: 10 PCS of 400x200x200mm / mould
Cycle time of Hollow Blocks of size 400x200x200: 15-20 Seconds
Vibration Frequency: 5 HZ ~ 50 HZ (300 r/min ~ 3,000 r/min)
- Vibration: the special design makes the vibration more uniform
- Vibration: Frequency Conversional Motors
- Bottom Vibration: 7.5 kWx2
- Vibration force: 2×43 KN + 2×7 KN
- Top Vibration: 0.55 kWx2
Hydraulic: Three-phrase Asynchronous Motor, 22 kW (ABB Motor)
- Same for Base Material & Facemix
- Hydraulic driven
- Capacity: Base Material Hopper: 0.9 m3; Face Material Hopper: 0.75 m3
Standard compression pressure:
Hollow block: 10-25 Mpa (as per different material ratio)
Interlock & paver: 15-50 Mpa (as per different material ratio)
Overall Dimension (L×W×H)mm:
With Facemix Device: 5,200×2,300×2,960mm
Without Facemix Device: 3,200×2,300×2,960mm
Gross weight: 10 Ton with Facemix Device
(Machine solidity will be increase accordingly)
The Vibration System is consistency of Frequency Conversional Control Technology and System. The vibration includes two main parts, the Bottom Vibration and the Tamper Head Vibration (top vibration). The Bottom Vibration consists of 2 Germany SIEMENS Frequency Conversional Vibration Motors. The 4 motors work separately and synchronized. It highly improves the vibration force and reduces the cycle time. The Tamper Head Vibration consists of 2 motors. With the Top Vibration, the density of high concrete products is better guaranteed and the adhesive force between mould and concrete products is reduced, which will shorten the demoulding time to reduce the total cycle time. Between the top vibration and the up-and-down cylinder, it is joined with Vibration Absorption Rubbers, which minimizes the vibration affect to mechanical system.
The Center Adjustment is automatic and self-learning. This system makes the vibro-pressing more efficient and reduces the possible error.
Moulding system consists of bulky oil tank, oil filter, oil cooler, high-dynamic proportional and directional valves, vibration and compression shaping, synchronous de-moulding device;
Strong vibrating force, which reaches up to 172 KN, makes it able to produce 10 blocks per mould (400x200x200), vibrating frequency varies at the different production processes; the maximum height of concrete products can be up to 300 mm.
Easy to set up, update and amend the production perimeters, so as to produce different kinds of products;
Four rods guiding system (40 Cr Steel finely polished, ¢ 70×3700) and long guide bushing assure the precise movement between the tamper head and the mould;
Hydraulic is using Integrated Modular Units that are optimized and use original Germany & Italy units. The motors used in hydraulic are ABB motors. This hydraulic system has strong compressing ability, guarantee the moulded products are of high density and intensity;
Highly productive moulding device consists of reciprocating feeding of raw materials, platform vibrating and compression shaping, which greatly reduce the cycle time. The products are of good shape and high quality.
By Edwina from Poland - 2016.12.19 11:10
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Debby from Hanover - 2016.10.23 10:29