QT2-12 manual hydraulic brick making machine
Technical description of QT2-12 manual hydraulic brick making machine
The equipment has high vibration power. Motor power 5.5kw, 11.9A, speed 2730r/min, high-speed motor drives gearbox vibration, frequency 50Hz/60Hz, speed 4500r/min, hydraulic pump motor 5.5kw, speed 1440r/min, pressure 16Mpa. Using anti-wear 46# hydraulic oil, the upper and lower molds are driven by hydraulic pressure, and the electric control box and manual valve are driven by the handle operation. This machine uses an electric motor to drive the oil pump. Fully hydraulically driven, the electric motor drives the eccentric gear to produce instantaneous strong vibration. Under the pressure of the table, it passes through the elastic rubber pad, and vertical vibration erupts instantly. Make the bricks take shape immediately. The circuit system design is simple, and Schneider brand contactors and button switches are durable.
2. Daily output:
Example: Calculation of 390x190x190 bricks can produce 4 bricks at a time and 480 bricks per hour. 3800 bricks can be produced in 8 hours a day. The bricks have very good pressure and high strength. (Brick pallets can be customized or processed by yourself, 1000 pallets, size (mm): 850*450*18, it is recommended that users buy 1200 fiberboard brick pallets), at least 2 pallets can be produced per minute. It can produce 120 pallets per hour.
3. Mold specifications:
The size of the mold is provided by the user and manufactured according to the cement brick standard. The cement brick machine mould is made of national standard 45# steel material, which has undergone carburization, template quenching, heat treatment and technical processes. Make the mold material more wear-resistant, ensuring that each set of molds can reach more than 200,000 times.
Make the mold life longer.
4·Equipment mold installation
The equipment is convenient and simple to change molds. Just unscrew the 6 screws of the upper mold, remove the cap, and then take it off. The bottom mold is also removed in the same way. To install the mold, just follow the above steps and put the mold into the equipment. Align the bottom mold with the screw holes first, and then screw in the screws. Then tighten the die screw. Start the oil pump and slowly push the handle to raise the pressure mold until it is parallel to the upper mouth of the bottom mold. Turn off the oil pump. Pay attention to the gap between the molds, which can be adjusted. Then tighten the mold screws, then start the oil pump, run the mold up and down a few times to ensure that the mold is normal, and then re-tighten all the mold screws.
5. Production requirements:
The equipment requires 2/3 workers to cooperate in production, and the first person manually operates the machine. The upper and lower molds of the equipment are flexible, and the operation steps are simple and easy to learn. The second person turns on the mixer, puts in the materials, puts the cement, adds water, and then puts the mixed materials out to prepare for making bricks. One more person can be added to professionally pull bricks and pile bricks. The person who drives the mixer can also pull the bricks.
6. Mixer: Vertical cylinder, diameter 1.5m, barrel height 500mm, total height 1.25m, power 7.5kw. Comes with a free discharge hopper.
7. The brick has high pressure, high strength and stable equipment performance. The key is that the equipment investment is small and the effect is quick. It is currently the best choice for family businesses, and it is also the equipment that investors are most keen to invest in. The equipment is highly praised by users all over the world.